Castle H-110 Disinfectant

SKU: 9c7da183 Category:

Please login to purchase this product.

Description

CASTLE H-110 DISINFECTANT Castle H-110 is a hospital grade disinfectant and has been formulated to aid the reduction of cross contamination in hospitals and nursing homes. Registered by the U.S. Environmental Protection Agency (EPA) for use against the 2019 novel coronavirus (COVID-19). This one-step disinfectant-cleaner is effective against a broad spectrum of bacteria. H-110 is virucidal and fungicidal; when used as directed, it also inhibits the growth of mold and mildew and their odors. Castle H-110 will deodorize surfaces in toilet areas, behind and under sinks and counters, garbage cans and garbage storage areas, and other places where bacterial growth can cause malodors. H-110 ( EPA Registration Number 1839-169-64174 ) has demonstrated effectiveness against viruses similar to 2019 novel coronavirus-Wuhan (also 2019-nCoV) on hard non-porous surfaces. Therefore, this product can be used against 2019 novel coronavirus-Wuhan (also 2019-nCoV) when used in accordance with the directions for use against Human Rotavirus, Feline Calicivirus, Canine Parvovirus, Rhinovirus Type 14, Rhinovirus Type 39, and Poliovirus Type 1 on hard, non-porous surfaces.

Uses:

  • walls
  • floors
  • nonporous surfaces

Directions:
DISINFECTION – To disinfect inanimate, hard non-porous surfaces add 2 ounces of Castle H-110 per gallon of water. Apply solution with a mop, cloth, sponge, hand pump trigger sprayer or low pressure coarse sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove excess liquid. For sprayer applications, spray 6-8 inches from surface, rub with brush, sponge or cloth. Do not breathe spray mist. For heavily soiled areas, a pre-cleaning step is required.

To disinfect toilet bowls: Remove gross filth or soils from surfaces with bowl brush. Add 2 ounces of Castle H-110 to the bowl water. Brush or swab the bowl completely using a scrub brush or toilet mop making sure to get under the rim. Let stand for 10 minutes and flush.

To disinfect food service establishment food contact surfaces: countertops, appliances, and tables, add 2 ounces of Castle H-110 per gallon of water or equivalent dilution. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a cloth, sponge or hand pump trigger sprayer so as to wet all surfaces thoroughly. Allow the surface to remain wet for 10 minutes, then remove excess liquid and rinse the surface with potable water. Castle H-110 cannot be used to clean the following food contact surfaces: utensils, glassware and dishes.

GENERAL CLEANING: Apply Castle H-110 to soiled area with a mop, cloth, sponge, hand pump trigger sprayer or low pressure coarse sprayer. Castle H-110 can be diluted at 2 ounces per gallon or equivalent dilution or applied at full strength. Thoroughly wet soiled surface and scrub as necessary.
DEODORIZATION – To deodorize, apply Castle H-110 as indicated under the heading DISINFECTION.

MILDEWSTAT – To control mold and mildew (Aspergillus niger) and the odors they cause on pre-cleaned, hard, non-porous inanimate surfaces add 2 ounces of Castle H-110 per gallon of water. Apply solution with a cloth, mop, sponge or hand pump trigger sprayer making sure to wet all surfaces completely. Let air dry. Prepare a fresh solution for each use. Repeat application at weekly intervals or when mildew growth appears.

DISINFECTING: ALLOW TO REMAIN VISIBLY WET FOR 10 MINUTES.

Packaging:
1 gal (#C39128) 4/case
5 gal (#C3905) pail

Contains: Not found

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Add to cart